Modbus RTU I/O components

Intelligent Modbus RTU I/O components

Specification

Manufacturer METZ Connect
Bus Modbus RTU

Filter

Category:    

Products

Picture Description price without VAT
thumb Modbus RTU-Digital input 4port (contact, voltage) (01300-MR-DI4-IP65ANZ-Modbus-RTU)
The MR-DI4 IP65 Modbus RTU with external display is suitable for detecting potential-free switch states, for example electrical limit switches on vent valves or auxiliary contacts of power contactors. The inputs can be operated by means of potential-free switches or contacts or used as voltage inputs. The device has two externally connectable display modules. Modbus RTU, RS485 (two-wire bus), Supply voltage 20 V to 28 V AC/DC
on request
thumb Modbus RTU-Digital input 4port (contact, voltage) (01300-MR-DI4-IP65-Modbus-RTU)
The MR-DI4 IP65 Modbus RTU is suitable for detecting potential-free switch states, for example electrical limit switches on vent valves or auxiliary contacts of power contactors. The inputs can be operated by means of potential-free switches or contacts or used as voltage inputs. Modbus RTU, RS485 (two-wire bus), Supply voltage 20 V to 28 V AC/DC
on request
thumb Modbus RTU-Digital input 4port (contact, voltage) (01300-MR-DI4-Modbus-RTU)
The MR-DI4 Modbus RTU is suitable for detecting potential-free switch states, for example electrical limit switches on vent valves or auxiliary contacts of power contactors. The inputs can be operated by means of potential-free switches or contacts or used as voltage inputs. Modbus RTU, RS485 (two-wire bus), Supply voltage 20 V to 28 V AC/DC
on request
thumb Modbus RTU-Digital input 10port (contact, voltage) (01300-MR-DI10-Modbus-RTU)
The MR-DI10 Modbus RTU is suitable for detecting potential-free switch states, for example electrical limit switches on vent valves or auxiliary contacts of power contractors, push buttons, window contacts, dew point sensors, occupancy sensors. Modbus RTU, RS485 (two-wire bus), Supply voltage 20 V to 28 V AC/DC
on request
thumb Modbus RTU 4 S0 inputs (DIN EN 62053-31) (01300-MR-SI4-Modbus-RTU)
The MR-SI4 Modbus RTU with 4 S0 inputs to DIN EN 62053-31 class A is suitable for counting S0 counter pulses. This allows very good integration of the module into an energy controlling system. In case of a power failure, the last counter readings are saved. Modbus RTU, RS485 (two-wire bus), Supply voltage 20 V to 28 V AC/DC
on request
thumb Modbus RTU-Analogue input 8port (resistance, voltage) (01300-MR-AI8-Modbus-RTU)
MR-AI8 Modbus RTU analogue input for passive temperature sensors (Pt1000, Ni1000, NTC) and other resistances and active 0-10V sensors (temperature, electrical vent, valve positions, window monitoring, dewpoint monitoring). he inputs can be configured universally by means of standard objects via a BACnet client. Modbus RTU, RS485 (two-wire bus), Supply voltage 20 V to 28 V AC/DC
on request
thumb Modbus RTU-Analogue input 4port (current, voltage) (01300-MR-CI4-Modbus-RTU)
MR-CI4 Modbus RTU analogue sensor module with 4 current and 4 voltage inputs for active 0-20 mA and 0-10V sensors (temperature, electrical vent, valve positions, window monitoring, dewpoint monitoring). Modbus RTU, RS485 (two-wire bus), Supply voltage 20 V to 28 V AC/DC
on request
thumb Modbus RTU (Energy, 1T, direct) (01300-MR-SM3-Modbus-RTU)
The module MR-SM3 Modbus RTU is a smart meter component for building automation. Current, voltage, power and many other values can be captured by three 230 Volt current circuits. In addition, the device provides monitoring functions of for example asymmetry, phase failure, phase sequence, overvoltage and undervoltage. These values can be queried via a Modbus-Master. Modbus RTU, RS485 (two-wire bus), Supply voltage 20 V to 28 V AC/DC
on request
thumb Modbus RTU-Mixed (digital in, digital out 16A) (01300-MR-DIO4_2-Modbus-RTU)
MR-DIO4/2 Modbus RTU sensor/actuator module with 4 digital inputs (for example for light switches and window contacts in a room) and 2 relay outputs for switching two light strips or controlling louvers. It can also be used to control 2 motorized fire dampers. Modbus RTU, RS485 (two-wire bus), Supply voltage 20 V to 28 V AC/DC
on request
thumb Modbus RTU-Mixed (digital in, digital out 10A) (01300-MR-DIO4_2-IP65-Modbus-RTU)
MR-DIO4/2 Modbus RTU sensor/actuator module with 4 digital inputs (for example for light switches and window contacts in a room) and 2 relay outputs for switching two light strips or controlling louvers. It can also be used to control 2 motorized fire dampers. Modbus RTU, RS485 (two-wire bus), Supply voltage 20 V to 28 V AC/DC
on request
thumb Modbus RTU-Mixed (digital in, digital out one and two-level) (01300-MR-TP-Modbus-RTU)
MR-TP Modbus RTU sensor/actuator module with 6 digital inputs (for example electrical limit switches on vent valves or auxiliary contacts of power contractors, push buttons, window contacts, dew point sensors, occupancy sensors) and 2 two-level relay outputs for switching multi-level pumps, fans, burners or similar and 2 digital outputs (2 SPST-NO, photoMOS relay). It can also be used for controlling louvers. Modbus RTU, RS485 (two-wire bus), Supply voltage 20 V to 28 V AC/DC
on request
thumb Modbus RTU-Mixed (Analogue input 4port, Analog output 2port) (01300-MR-AIO4_2-IP65-Modbus-RTU)
MR-AIO4/2-IP65 Modbus RTU analogue input for passive temperature sensors (Pt1000, Ni1000, NTC) and other resistances and active 0-10V sensors (temperature, electrical vent, valve positions, window monitoring, dewpoint monitoring) and 2 analog 0-10 V outputs. The inputs can be configured universally by means of standard objects via a BACnet client. Modbus RTU, RS485 (two-wire bus), Supply voltage 20 V to 28 V AC/DC
on request
thumb Modbus RTU-Output (digital out Triac 0.5A) (01300-MR-TO4-Modbus-RTU)
MR-TO4 Modbus RTU actuator module with 4 digital outputs (Triac 0.5A) for switching switching electrical components, such as relays, contactors, HLK valves etc. Modbus RTU, RS485 (two-wire bus), Supply voltage 20 V to 28 V AC/DC
on request
thumb Modbus RTU-Output (digital out 5A) (01300-MR-DO4-Modbus-RTU)
MR-DO4 Modbus RTU actuator module with 4 relay outputs (changeover contacts) for switching motors, contactors, lamps, louvers, etc. Modbus RTU, RS485 (two-wire bus), Supply voltage 20 V to 28 V AC/DC
on request
thumb Modbus RTU-Analogue Output 4port (voltage) (01300-MR-AOP4-Modbus-RTU)
MR-AOP4 Modbus RTU with 4 analog 0-10 V outputs (for electrical vent and mixing valves, valve positions, etc.). Each output can be set for automatic or manual operation by means of 4 potentiometers at the front. Modbus RTU, RS485 (two-wire bus), Supply voltage 20 V to 28 V AC/DC
on request